News

Home / News (Page 3)

News

  • Features To Consider When Using PCBS

    A pin header is typically a simple and inexpensive type of electrical connector used for the connection of computer hardware and other electronic assemblies. A standard male pin header comes with one or more flat rows of small metal contacts molded into a thin plastic backing, usually 2.5 mm in thic...

  • DIP Switches - An Overview

    What are DIP switches? A DIP switch is an electronic switch that is packed together with other devices in a single unit in a typical dual in line package. The word DIP often refers to both the switch itself, and to the device in the package as a whole called a discrete interference insert. The switc...

  • Choosing a Terminal Block For Your RFID Software Tool

    A popular method of protecting electronic circuits from damage is with terminal blocks. However, most people do not understand exactly what a terminal block is and how it works. Well, this article will answer your questions on what a terminal block is, how they work and what to look for when purchas...

  • How to choose a waterproof connector

    Waterproof connector refers to a connector that meets the response waterproof performance. Generally, it is not used in households, but is used in industrial environments and outdoor environments. The waterproof performance of the product needs to be tested and graded before shipment. Depending on t...

  • What are the advantages of screw-type pcb terminal blocks

    Terminals used in the electrical connection of printed circuit boards are referred to as PCB terminals or PCB connectors in the industry. The screw-type structure of the terminal block can provide a more compact structure and more reliable crimping for the pcb. The screw-type pcb terminal blocks are...

  • How to prevent connector terminal failure

    The connector terminal is an accessory product used to realize electrical connection, which is classified as a connector in the industry. With the increasing degree of industrial automation and stricter and more precise industrial control requirements, the demand for connector terminals has graduall...

  • What is the detection method of the contact pressure of the connector

    The connector is used on the connector to connect the positioning joint of the electronic circuit, which is composed of the connector and the plug-in unit. Therefore, the connector can also be directly understood as a connector. In a sense, the reliability of the connector depends on the contact pre...

  • What are the plating treatment methods for connector aviation plug contacts

    The contact body of the connector aviation plug is the core part to complete the electrical connection function. Generally, a contact pair is composed of a male contact piece and a female contact piece, and the electrical connection is completed by the insertion of the female and male contact pieces...

  • What is the detection procedure for terminal connector short-circuit fault

    The terminal connector is a bridge between electronic parts. As a piece of metal sheet enclosed in insulating plastic, the terminal connector has holes for insertion at both ends, and the number and spacing of wires can be selected arbitrarily, making the connection more convenient and faster, and g...

  • Why spring thimble connectors are better than shrapnel connectors

    Commonly used battery connectors have two forms: spring thimble and shrapnel type connectors. However, mobile phones mostly use spring thimble connectors as battery connectors. This is because the spring thimble connector has more advantages compared with the shrapnel type connector. Compared with t...